1st–6th Gen Tacoma, Tundra, 4Runner, Sequoia, Land Cruiser
- OEM pod light bucket recommended (refer to fitment verifier for non-pod bumper compatibility)
- 1st gen through current generation supported
The GGLighting 7" DayMaker LED Lights with included wiring harness deliver 11,500 lumens per unit and 105W long-range driving beam output, engineered to fit Toyota Tacoma, Tundra, 4Runner, Sequoia, and Land Cruiser across 1st through 6th generations. These pod lights cut through dust, darkness, and trail conditions with precision beam geometry designed for high-speed driving and technical terrain.
Extreme Output in a Compact Package
The DayMaker design packs 11,500 lumens and a 105W draw into a sealed 6 7/8" round form factor, eliminating the dim, spread-pattern lighting of factory headlights. The driving beam concentrates light where you need it—far ahead on the trail or highway—without the spillover that causes glare or washes out contrast.
- 11,500 Lumens Per Light: Total output scales with quantity ordered; dual setup delivers over 23,000 lumens of focused driving beam.
- 105W at 12V (8.75A draw): Engineered to run on stock Toyota alternator output without auxiliary power upgrades on most applications—refer to fitment guide for specific alternator capacity on your model year.
- 6 7/8" Round Mounting: Fits OEM pod light locations and aftermarket brackets on Tacoma, 4Runner, and Tundra bumpers without modification.
- Interchangeable Lens Covers: Swap between clear, green (night vision preservation), and yellow (dust/low visibility) covers without tools—pry-tab design takes seconds.
- Lifetime Warranty: Sealed LED construction rated for mudding, high-water fording, and extended off-road use.
Fitment: 1st–6th Gen Tacoma, Tundra, 4Runner, Sequoia, Land Cruiser
The DayMaker bundle supports Toyota truck and SUV models spanning 1st-generation Tacoma through 6th-generation Tacoma, all Tundra generations, 4Runner (all generations), Sequoia, Land Cruiser, and FJ Cruiser. Use the fitment verifier above to confirm compatibility with your exact year, cab configuration, and bumper type, as OEM pod light availability varies by trim and generation.
Installation
Bolt-on installation with no drilling or cutting required on vehicles with existing OEM pod light buckets. If mounting to non-pod bumpers, refer to GGLighting's bracket kits. The bundle includes one wiring harness for every two lights ordered, complete with relay, switch, and all connectors.
About GGLighting
GGLighting specializes in off-road LED lighting designed for extended lumen output and beam control in low-visibility conditions. Each DayMaker unit carries a lifetime warranty and is sealed against mud, water, and corrosion—standard for Toyota truck and SUV use.
| Attribute | Specification |
|---|---|
| Lumen Output (Per Unit) | 11,500 lumens |
| Power Draw | 105W (8.75A @ 12V) |
| Diameter | 6 7/8" |
| Depth | 2 7/8" |
| Beam Pattern | Long-range driving beam |
| Lens Options | Clear, green (night vision), yellow (dust/low-visibility) |
| Mounting | 6 7/8" round pod light bucket |
| Warranty | Lifetime |
| Wiring Harness | One included per two lights |
- Difficulty Level: Bolt-on (OEM pod light bucket vehicles) / Moderate with bracket kit (non-pod bumpers)
- Required Modifications: None—100% drop-in replacement in existing OEM pod light sockets. Non-pod bumper mounting requires optional GGLighting bracket kit (refer to fitment guide)
- Hardware Note: Wiring harness, relay, switch, and connectors included with bundle (one harness per two lights)
What Owners Are Saying
Be the first to review this product.
You May Also Like
Product FAQ
Will these lights work with my 2015 Tacoma's factory electrical system?
Do I need a relay kit to run these DayMakers?
Can I swap the lens covers without removing the light?
Built by Owners, for Owners
Bolted right on and fit perfectly. Support even confirmed fitment before I ordered.
Finally a shop that actually knows Toyotas. No guesswork, no wrong parts.
Fast shipping and the install guide made it a one-evening job. Stoked.