Fitment Verified
2007–2024 Toyota Tacoma, 4Runner, Tundra, Sequoia, Land Cruiser, FJ Cruiser
Tacoma4RunnerTundraSequoiaLand CruiserFJ Cruiser
Fits all cab and bed configurations
Turn your LED Bar, rock lights, or Pods on/off and strobe with a wireless remote control. Really simple to install if you are using one of our harnesses, just plug it inline and you're done.
This harness also has 2 different strobe patterns built into it!
Will control up to 40amps.
Note:
You will hear the relay clicking.
Will not work with 3 wire style harnesses for lights such as the dual color GP10, CB30 and CB60.
The remote does not have memory, it must be turned on each time to the flash setting you like.
*Wiring harness shown not included
| Attribute | Specification |
|---|---|
| Function | Wireless Remote Relay Controller with Strobe Patterns |
| Maximum Amperage | 40 amps |
| Strobe Patterns | 2 built-in patterns + steady mode |
| Control Type | Wireless remote with memory note: remote does not retain last-used pattern and must be set each use |
| Installation Method | Inline connector (plug-and-play with GGLighting harnesses) |
| Compatibility | GGLighting harnesses only; not compatible with 3-wire style harnesses |
- Difficulty Level: Moderate (plug-in if using GGLighting harness; basic electrical knowledge recommended for standalone wiring)
- Required Modifications: None — 100% drop-in relay module with inline connector design. No cutting, drilling, or dash removal required when used with GGLighting harnesses.
- Hardware Note: Relay and wireless remote included. Wiring harness shown in product images sold separately.
What Owners Are Saying
Be the first to review this product.
Completes the Build
All Tundra parts →You May Also Like
Product FAQ
Does this controller work with any LED light bar or only GGLighting products?
No — while the relay can control any light up to 40 amps, it is plug-and-play only with GGLighting harnesses. For non-GGLighting lights, you will need to wire it inline manually or source a compatible GGLighting harness for your light. The controller is not compatible with 3-wire dual-color lights (GP10, CB30, CB60).
Will I need to drill holes in my dashboard or cut into my factory wiring?
No. If you're using a GGLighting harness, this controller simply plugs inline—zero modifications to the truck. The remote is wireless, so there's no switch panel to install. Refer to the fitment guide to confirm your harness is compatible.
Does the remote remember which strobe pattern I used last?
No. The remote has no memory, so you must select your desired pattern (steady, pattern 1, or pattern 2) each time you turn on the lights. This is by design and does not indicate a malfunction.
Built by Owners, for Owners
★★★★★
Bolted right on and fit perfectly. Support even confirmed fitment before I ordered.
★★★★★
Finally a shop that actually knows Toyotas. No guesswork, no wrong parts.
★★★★★
Fast shipping and the install guide made it a one-evening job. Stoked.
The Insider
Read the blog →
app-specific
Best LED Headlights for the 2016–2023 Toyota Tacoma (3rd Gen) — Every Option Compared
Read More →
Fitment Guide
Toyota Tacoma Gen 1 (1995-2004) Wheel & Tire Fitment Guide — Offset, Lift, & Recommendations
Read More →
Fitment Guide
Toyota Tacoma Gen 2 (2005-2015) Wheel & Tire Fitment Guide — Offset, Lift, & Recommendations
Read More →